It is understood that, with the opening and closing parts water gate valve, the direction of movement of water distribution valve plate perpendicular to the direction of the fluid, can only be fully open and fully closed, can not be adjusted and the throttle. There are two water distribution valve plate sealing surface, sealing surface to form two wedge, wedge angle with the valve parameters vary with the water valve is usually 50, with the water temperature is not high when the gate is 2 ° 52 '.
With water gate valve called the flexible gate with water gate valve can be made into a whole, called the rigid gate; can also be made to produce small quantities of deformation gate in order to improve its process, make up the sealing surface angle in the processing produced during the deviation.
Water distribution valve in our lives is very common, it constitutes part of the water distribution valve which, you know. With a look below.
1, the parade capture installation: Design casters adoption battle outside spiral flow being female together, gripping the rod do the next move and not just spin euphemism, euphemism for a longer spin, spin in order to reduce the drag reduction euphemism casters under the ball to take the rotation method of conflict pneumatic valves.
2, valve: valve from the valve body, valve tongue, and other parts of the tapered seal ring dilute group fails, the body is curved angle bend welding parts, cone dilute non-guaranteed water distribution loop start gate density function Kai Jia good vitals , for zero body forging, flange even pay to take the body, the valve stem of the tongue taking a convergence approach to cross-type hinge, regulating valve.
3, even post war gripping the rod stem rod that non-convergence.